8 mistakes to avoid when purchasing tires

8 mistakes to avoid when purchasing tires

Automobiles help people travel from one place to another conveniently at any time of the day. However, they require regular upkeep. An essential component that requires replacement with time is the tires. Sadly, many people make mistakes when buying new tires, which affects the vehicle’s performance and risks their safety. Individuals must research well before purchasing a new set of wheels and avoid these eight mistakes as far as possible.

Picking low-speed-rated options
Each tire is designed to match a specific speed limit. Manufacturers use a Tire Speed Rating (TRS) system to help buyers determine the speed intensity the rubber can handle. If a driver exceeds the set limit, the tire might suffer unavoidable damage and even burst, which could have devastating results. Tires with an “H” speed rating can usually handle speeds up to 130 miles per hour, while those with an “L” rating can only do about 75 miles per hour. Vehicle owners must pick a tire based on the manufacturer’s guidelines and the speed intensity it is expected to match.

Not accounting for fitment
Customers must consider several factors when purchasing a new set of wheels, including their fitment. Fitment refers to the tires’ diameter, offset, and width. Individuals should buy tires that fits their wheels perfectly and do not rub against any part of the vehicle’s body. If unsure, one must buy tires recommended by the automobile manufacturer. Poor offset may result in excessive wear and tear of the rubber, which could affect its lifespan and overall performance.

Using the same tires all year
Car owners often buy tires marked “all-season” and use them throughout the year, which is a big mistake. During winter, drivers need different tires that provide extra grip and stability. However, winter tires start to wear faster in the summer months, meaning one needs a change again. Therefore, individuals should have two sets of wheels based on the weather conditions. While it may cost more, it improves the vehicle’s performance and ensures safety in the long run.

Installing cheaper tires
The market has several tire manufacturers, each selling multiple products at various prices. So, customers may find extremely cheap tires from lesser-known brands. But it is better to avoid these, mainly if one drives their vehicle daily or takes on more challenging terrain. While a cheaper set might help save a couple of dollars, it may wear out faster and be more prone to damage. The early wear and tear would also force drivers to repair or replace the tires faster than usual, which may cost more in the long haul. As a result, experts recommend spending a little more on good quality tires, which will offer superior grip, performance, and durability.

Skipping the warranty
All tires, even those by reputable brands, are prone to wear and tear, no matter how good the quality of the rubber. Therefore, when buying a set of tires, customers must ensure the product comes with a warranty. Picking good quality tires with a suitable warranty ensures customers do not have to dip into their savings if the tires suffer unforeseen damages. One could also check online or with a local dealership for the best additional warranty. Some manufacturers offer a warranty for a specific number of miles driven or up to a couple of years, whichever comes first.

Not paying heed to the numbers
The numbers engraved on a tire are there for a reason, and ignoring them could cost one dearly. A service prefix is usually printed on the side of the tire, which indicates the type of vehicle it is intended for. The three digits following the service prefix tell the user the cross-sectional width of the tire in millimeters. A “225” would indicate that the widest point from the inner sidewall to the widest point of the outer sidewall (when properly mounted) is 225 millimeters. The next two digits tell the buyer the aspect ratio. A 225/45 would mean the sidewall distance (from the wheel rim to outside the tread) is 45% of 225 mm. Therefore, 225/50 and 225/45 are not the same things, and here’s where most buyers make a mistake. A tire with a higher aspect ratio will have a taller sidewall, and a tire with a lower aspect ratio will have a smaller profile sidewall.

Not buying based on the expected qualities
Another common mistake people make is buying tires without determining why they require them. Every tire has different quality factors and fit specific needs. For instance, some tires go faster than others, while others carry more weight. Therefore, before purchasing, customers must know their needs and driving patterns.

Changing tires unnecessarily
While the tires will need to be changed at some point, one might waste money if they change them too early. If a user checks their tires and finds the tread depth is still in good shape, they have complete control of the car, and the ride is smooth, they probably do not need to purchase new tires. If one checks the rubber and realizes it is about to wear out but they had no problems throughout its lifespan, one may buy the same brand of tires rather than switching to ones they have never used before.

Although it may not seem like it, purchasing tires is an important decision. Getting the wrong ones can affect the car’s performance on the road and increase the risk of mishaps. Those looking to buy new tires must take their time to research well and not decide in haste. If unsure about anything, one can consult an expert to avoid making mistakes. While researching can take some effort, it is a beneficial step that should not be ignored.

© 2023 All Rights Reserved.
Cookie settings